Flat Sheet

  • 10K Yellow, White, Pink, & Green Gold
  • 22K Yellow & 24K Fine Gold
    		•
  • 14K Yellow, White, Pink, & Green Gold
    		•
  • Palladium & Ruthenium-Palladium
    		•
  • 18K Yellow, White, Pink, & Green Gold
    		•
  • Fine Silver & Sterling Silver
  • 14K & 18K Palladium White Gold
    		•
  • Platinum & Iridium-Platinum
    		•
  • 18K & 22K Bi-metal
    		•
  • Reticulation Silver
  • Argentium Sterling Silver
    		•   

    Approximate weight per square inch. Karat gold in pennyweights (dwt) - 24K gold and silver in ounces (oz)
    GA IN MM 10K 14K 18K 24K Platinum Palladium Sterling Silver

    Argentium Silver

    		Fine Silver
    6 0.162 4 0.89   0.89
    PLT 0.150 3.7 18.30 20.70 24.60 33.80 19.00
    8 0.128 3 15.70 17.70 21.00 1.31 28.80 16.20 0.7   0.71
    9 0.114   14.00 15.70 18.70 1.17 25.70 14.40
    10 0.101 2.5 12.40 13.90 16.60 1.04 22.80 12.80 0.55   0.56
    11 0.091   11.10 12.60 14.90 0.91 20.50 11.50
    12 0.080 2 9.85 11.00 13.10 0.82 18.00 10.10 0.44   0.44
    13 0.072 1.7 8.77 9.94 11.80 0.74 16.20 9.10
    14 0.064 1.5 7.81 8.83 10.50 0.66 14.40 8.09 0.35   0.35
    15 0.057   6.69 7.87 9.35 0.59 12.80 7.20
    16 0.051 1.25 6.21 7.04 8.36 0.52 11.50 6.45 0.28 0.28 0.28
    17 0.045   5.52 6.21 7.38 0.46 10.10 5.69
    18 0.040 1 4.91 5.52 6.56 0.41 9.01 5.06 0.22 0.22 0.22
    19 0.036   4.38 4.97 5.90 0.37 8.11 4.55
    20 0.032 0.75 3.90 4.42 5.25 0.33 7.21 4.04 0.18 0.18 0.18
    21 0.028   3.47 3.86 4.59 0.27 6.31 3.54
    22 0.025 0.625 3.09 3.45 4.10 0.26 5.63 3.16 0.14 0.14 0.14
    23 0.023   2.75 3.17 3.77 0.24 5.18 2.91
    24 0.020 0.5 2.45 2.76 3.28 0.20 4.51 2.53 0.11 0.11 0.11
    25 0.018   2.18 2.48 2.95 0.18 4.06 2.28
    26 0.016   1.94 2.21 2.62 0.16 3.60 2.02 0.09   0.09
    27 0.014   1.73 1.93 2.30 0.14 3.15 1.77
    28 0.013   1.54 1.79 2.13 0.13 2.93 1.64 0.07   0.07
    29 0.011   1.37 1.52 1.80 0.11 2.48 1.39
    30 0.010   1.22 1.38 1.64 0.10 2.25 1.26 0.05   0.06
    Blank spaces indicates unavailable items.
    Gold supplied in sheets up to 3" x 12" in any thickness from .150" to .010".
    Fine gold supplied in thickness .150" to .003".
    Sterling Silver supplied in sheets up to 12" x 24" in even gauges (12 - 26ga) only. (Can be special ordered.)
    Blanks: Any gold sheet less than 1/2" square will be priced as blanks with an additional charge.
    Call for availability on palladium and platinum sheet.

    HOW TO CALCULATE THE PRICE FOR FLAT SHEET

    Example: 14K yellow 20ga x 2" x 3"
    1. Multiply the length of the sheet by the width: 2" x 3" = 6" square
    2. Locate the weight per square inch on the chart above: (14K 20ga) = 4.42 dwt
    3. Multiply the square inch by the weight per square inch: 6" square x 4.42 dwt = 26.5 dwt
    4. Multiply the weight by the quantity bracket price located on the karat gold schedule:
      26.5 dwt falls in the 25 - 50 dwt rate for 14K yellow sheet = $14.12 (@ $400 market)
      26.5 dwt x $14.12 = $374.18

    (more pricing schedules)

    KARAT GOLDS, PLATINUM, AND PALLADIUM WIDTHS

      Gold sheet is normally stocked in 3" widths and no greater than 12" in length. Sheet is available in any thickness from .150" to .010". Sheets 30 gauge or less are restricted to pure material (.9995+) and are rolled in smaller widths and lengths to achieve flatness requirements. A width of 2" or less is recommended. Wider sheets may be supplied on special request up to 6" in medium gauges (i.e. 18 or 20 gauge). Please call and speak with a fabricator to discuss the specifics.

    TEMPER

      Karat gold sheet is provided in 1/4 hard temper (annealed 1 B&S gauge before final reduction) unless otherwise requested. Dead soft or hard temper are available upon request at no extra charge. Sterling sheet is provided in soft temper unless otherwise requested. Hard temper sterling silver is restricted to 6" maximum width and is subject to an additional charge for the tempering.

    12" WIDE STERLING SILVER AND FINE SILVER SHEET

      Both are available in 12" x 24" maximum dimensions in 16, 18, 20, 22, 24, and 26 gauge thickness at an additional charge of $0.80 per ounce. In sterling silver, 12 and 14 gauges are also available. If the width exceeds 6" then the additional cost is incurred (i.e. 7" x 11"). Normal stock width is 6" x 24" from 8 to 30 gauge. Sheets are cut to any width or length as long as they are less than stock size.

    MINIMUM SHEET DIMENSIONS

    Sheet pieces less than the following sizes will have a blanking charge added:
    Any gold sheet: Single pieces - less than 1/2" square
      Multiple pieces - less than 1" square
    Any silver sheet: Single pieces - less than 3" square
      Multiple pieces - less than 6" square

    BLANKS

      Blanks is a term referring to metal sheets that are cut smaller than certain minimum dimensions for each respective type of metal. Since there is a significant amount of additional effort required to cut multiple small pieces, an additional charge is added to the normal sheet prices.

    Phone: (800) 462-7447 - Fax: (800) 535-3829 - E-Mail: support@hauserandmiller.com