Discs
| |
|
| Coin Size | Fraction IN | Decimal IN | MM | 10K | 14K | 18K | Platinum | Palladium | Silver |
| 1/8 | 0.125 | 3.1 | 0.06 | 0.07 | 0.08 | 0.11 | 0.06 | 0.003 | |
| 3/16 | 0.188 | 4.8 | 0.13 | 0.15 | 0.18 | 0.25 | 0.14 | 0.006 | |
| 1/4 | 0.250 | 6.4 | 0.24 | 0.27 | 0.32 | 0.44 | 0.25 | 0.011 | |
| 5/16 | 0.313 | 7.8 | 0.38 | 0.43 | 0.51 | 0.70 | 0.39 | 0.017 | |
| 3/8 | 0.375 | 9.5 | 0.54 | 0.61 | 0.73 | 1.00 | 0.56 | 0.024 | |
| 7/16 | 0.438 | 10.9 | 0.74 | 0.84 | 1.00 | 1.37 | 0.77 | 0.033 | |
| 1/2 | 0.500 | 12.7 | 0.96 | 1.08 | 1.29 | 1.78 | 0.99 | 0.043 | |
| 17/32 | 0.531 | 13.3 | 1.09 | 1.23 | 1.47 | 2.02 | 1.13 | 0.048 | |
| 9/16 | 0.562 | 14.3 | 1.21 | 1.37 | 1.63 | 2.25 | 1.26 | 0.054 | |
| 5/8 | 0.625 | 15.9 | 1.50 | 1.69 | 2.02 | 2.77 | 1.55 | 0.067 | |
| Dime | 11/16 | 0.687 | 17.4 | 1.81 | 2.04 | 2.44 | 3.36 | 1.88 | 0.081 |
| Penny | 3/4 | 0.750 | 19.1 | 2.15 | 2.43 | 2.90 | 3.99 | 2.23 | 0.096 |
| Nickel | 13/16 | 0.812 | 20.6 | 2.53 | 2.86 | 3.41 | 4.69 | 2.62 | 0.113 |
| 7/8 | 0.875 | 22.2 | 2.93 | 3.31 | 3.95 | 5.44 | 3.04 | 0.131 | |
| Quarter | 1 | 1.000 | 25.4 | 3.83 | 4.33 | 5.16 | 7.10 | 3.97 | 0.172 |
| 1 1/8 | 1.125 | 28.6 | 4.85 | 5.48 | 6.53 | 8.99 | 5.03 | 0.217 | |
| 1 3/16 | 1.187 | 30.1 | 5.40 | 6.10 | 7.28 | 10.01 | 5.60 | 0.242 | |
| Half Dollar | 1 1/4 | 1.250 | 31.8 | 5.98 | 6.76 | 8.06 | 11.09 | 6.21 | 0.268 |
| 1 3/8 | 1.375 | 34.9 | 7.24 | 8.18 | 9.75 | 13.42 | 7.51 | 0.324 | |
| Dollar | 1 1/2 | 1.500 | 38.1 | 8.62 | 9.73 | 11.61 | 15.98 | 8.94 | 0.386 |
| 1 5/8 | 1.625 | 41.3 | 10.11 | 11.42 | 13.62 | 18.75 | 10.49 | 0.453 | |
| 1 3/4 | 1.750 | 44.5 | 11.73 | 13.25 | 15.80 | 21.75 | 12.16 | 0.525 | |
| 2 | 2.000 | 50.8 | 15.32 | 17.3 | 20.64 | 28.40 | 15.89 | 0.686 |
Silver supplied in even gauges only.
Argentium is currently supplied in 16, 18, 20, 22, and 24 gauge.
HOW TO CALCULATE PRICING FOR OTHER GAUGES
To estimate the weight of discs in other gauges multiply the weight for the size and alloy from the above table by the factor for the other gauge from the table below.
| Gauge | Factor | Gauge | Factor |
| 10 | 2.528 | 22 | 0.627 |
| 12 | 2.005 | 24 | 0.489 |
| 14 | 1.590 | 26 | 0.396 |
| 16 | 1.261 | 28 | 0.314 |
| 18 | 1.000 | 30 | 0.249 |
| 20 | 0.792 |
Example: 1 5/8" disc in 22 gauge 14K yellow.
- Multiply the weight of an 18 gauge sheet by the conversion factor for 22 gauge
11.42 dwt x .627 = 7.16 dwt - Multiply the weight by the
quantity
bracket price located on the karat gold schedule:
7.16 dwt falls in the 5 - 10 dwt rate for 14K yellow sheet = $15.51 + $1.00(disc addition) (@ $400 market)
7.16 dwt x $16.51 = $118.21
For gold, platinum, and palladium pricing is based on the sheet price plus an additional fabrication charge for discs. For sterling, fine silver, and reticulation silver (820) refer to the sterling disc price schedule based on disc size and quantity.